Home Improvement Electrical - Replacing older vessels from one to two wires to a three-wire Receptacle;

Image : http://www.flickr.com

We live in a bigger house? Two points of wire can be replaced with a similar result, or can be adapted. National Electric Code does not allow you to change two-wire (old) three wire receptacle (new) record. But there is a solution to this problem. I recommend to change, a ground fault circuit commonly referred to as FI or GFI. It is the easiest way for two container with a wire three wire containers replaced.

Before you do anything out foreverpower to that receptacle or group of ships to work on or change. You can use a test recording with a measuring device or just a lamp. Ensure that the recruitment of the changes before you try a.

The white wire should be connected to what is the side line of GFCI on the vine in silver. There may be more of a white cord. Close both silver on this screw. Screws color coated should know for some, for which edge (use whiteand black). Some GFCI can be marked in white for the white wire to find an electrician to be "grounded conductor." In some boats, you can have more than a trickle because of other containers, which can power wires. White wires should be on the side of the ship with vines of silver.

Wires blacks should be on the vines of gold. If there are two wires blacks, connect the two screws gold. This is easy to remember. Black gold: white, silver. This is importantcall an electrician because it takes the correct polarity. "This means that the white wire to the outlet of the widest part of the tail. The white wire is the widest part of the wire as a conductor" of protection known function. "

A circuit or GFCI monitors the current flow itself. Therefore, you can replace a two wire receptacle with a lifesaver. You can not just replace it with a three-prong outlet, because it has no protective conductor. If you fault or breakdownit comes in its own way after that you can be. Be safety smart is better.

Gaming Pc leather armchair